Deutz TCD2013L06 2V / Volvo D7E GCE3 Major Overhaul Kit is a major overhaul kit intended for the engine or application identified in the product title. This listing combines the existing HD Kits product information with the latest available vendor-supplied details so buyers can review fitment clues, specifications, included components, and replacement references in one place.

What Is Included

The vendor data currently supplied for this item lists the following components. Quantities and dimensional notes are retained where provided:

• Piston [STD] TCD 2013 2V [108.0 mm][3-Ring] (x 6)
• Ring Set [STD] BF 1013CP / EC (x 6)
• Liner [Cylinder / Wet / Finished] [108.0 mm] (x 6)
• O-Seal / O-Ring [Cylinder Liner] 1013 / 2013 / 7.8 (x 12)
• Main Bearing Pair [STD] 1013 / 2013 [85.00 mm] (x 7)
• Rod Bearing Pair [STD] 1013FC / 2013 [68.00 MM] (x 6)
• Rod Bushing [42 mm] 1013 / 2013 [Finished] (x 6)
• Exhaust Valve [45?] BF / TCD 1013 / 2013 2V / M / VOLVO (x 6)
• Intake Valve [30?] BF / TCD 1013 / 2013 (x 6)
• Valve Cone / Cotter / Keeper / Collet [3 Groove / Notch] (x 24)
• Valve Guide – 1013, 2013 & TCD 2013 L4 / 6 2V (x 12)
• Gasket Kit [Full] TCD 2013 L6 2V / VOLVO (x 1)
• Head Gasket – TCD 2013 L6 2V / VOLVO [1-Notch / Hole] (x 1)
• Tappet [Valve] TCD 2013 L4 / 6 2V / VOLVO (x 12)
• Fuel Pump [Belt Driven] TCD 2013 L4 / 6 2V / VOLVO (x 1)
• Oil Pump [Front Cover] BF 6M 1013 / C / E / EC / CP / FC (x 1)
• Fuel Filter [Spin-On] TCD 2012 / 2013 / 7.8 2 / 4V (x 1)
• Oil Filter [Spin-On] 912 / 3 & 1012 / 13 & 2012 / 13 (x 1)
• Head Bolt – 1013 / 2013 (x 26)
• Camshaft Bushing – 1013 [Thick] (x 1)
• Camshaft Bushing – 1013 [Thin] (x 6)
• Rod Bolt – BF 1013 & TCD 2013 (x 12)

What This Part Is Used For

This major overhaul kit is used during diesel-engine service, repair, or overhaul when the corresponding original component is worn, damaged, or being replaced as part of scheduled engine work. Using the correct configuration matters because engines within the same family can differ by serial number, build specification, piston or liner size, bearing size, gasket configuration, emissions version, or other production changes.

Before Ordering

Confirm the engine model, complete part number, and any available engine serial number before purchase. For rebuild kits, also verify required standard or oversize/undersize dimensions when applicable. The product title and vendor details above should be used as fitment references, not as a substitute for checking the engine data plate or the parts information for the specific machine. If your engine configuration is uncertain, provide the engine model and serial number when requesting a fitment check.

Common Questions

What is Deutz TCD2013L06 2V / Volvo D7E GCE3 Major Overhaul Kit?

It is a major overhaul kit for the engine or application identified in this listing, with the supplied specifications and component details shown above.

How do I confirm that it fits my engine?

Match the engine model and part number first, then verify the engine serial number, build code, and any size or configuration notes supplied for the part. This is especially important for overhaul kits and internal engine components.